---
title: "Docker MTU Configuration | NordLayer Help"
slug: "docker-mtu-configuration"
description: "When using Docker with NordLayer you may experience connectivity issues.This is caused by how Docker is configuring the MTU or by the network path itself not supporting Path MTU Discovery."
updated: 2023-01-30T16:08:17Z
published: 2023-01-30T16:08:17Z
canonical: "help.nordlayer.com/docker-mtu-configuration"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.nordlayer.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Docker MTU Configuration

When using Docker with NordLayer you may experience connectivity issues which are caused by how Docker is configuring the MTU or by the network path itself not supporting Path MTU Discovery.

To resolve this problem, you would need to reconfigure the MTU on the Docker network interface.

***In this guide, we use 1420 as the MTU value, but generally the MTU depends on the Network that is being used to connect to the NordLayer service and the encryption protocol. The lowest value for MTU that has been tested to work is 1280.***

1. To start with, connect to the NordLayer private or shared gateway and open ​​Docker **Command Line Interface (CLI)** to find out the network interface name by using the **ip** command:

```
$ ip route get 1.1.1.1
```

You will get an output similar to this:

```
1.1.1.1 dev nlx0 table 51820 src 10.6.12.2 uid 1000
```

Based on the results, our interface is **nlx0**, but **yours may differ**.

1. To display the size of MTU that is locally configured on your interface, enter the following command together with the correct interface from Step 1:

```
$ ip link | grep nlx0
```

You will get an output similar to this:

```
7: nlx0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1420 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 500
```

1. To finish the configuration, please edit the file **/etc/docker/daemon.json** and enter the MTU size of your interface:

```
{
   "mtu":1420
}
```

## Solving the problem on Docker-Compose

If you are using docker-compose, the MTU needs to be set additionally in the **docker-compose.yml** file:

```
version: "3"

services:
  app:
    image: acme/app
  networks:
    - my-net

networks:
  my-net:
    driver: bridge
    driver_opts:
      com.docker.network.driver.mtu: 1420
```

**Note**: In case you have any questions or are experiencing any issues, please feel free to contact our [24/7 customer support team](/docs/how-do-i-contact-nordlayer-customer-support).